Sienna FWD V6-3.3L (3MZ-FE) (2006)
Speaker: Service and Repair
Stereo Speaker
STEREO COMPONENT SPEAKER
REMOVAL
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH
2. REMOVE STEREO COMPONENT SPEAKER ASSEMBLY
a. Remove the 2 screws.
b. Disconnect the connector and remove the stereo component speaker assembly.
INSTALLATION
1. INSTALL STEREO COMPONENT SPEAKER ASSEMBLY
a. Connect the connector.
b. Install the stereo component speaker assembly with the 2 screws.
NOTE: Tighten the screws in order shown in the illustration to install the stereo component speaker assembly.
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH