Sienna FWD V6-3.3L (3MZ-FE) (2006)
Speaker: Service and Repair
Rear Speaker
REAR SPEAKER
REMOVAL
1. REMOVE REAR DOOR SCUFF PLATE
2. REMOVE REAR DOOR WEATHERSTRIP
3. REMOVE BACK DOOR WEATHERSTRIP
4. REMOVE BACK DOOR SCUFF PLATE
5. REMOVE QUARTER TRIM FRONT PANEL ASSEMBLY
6. REMOVE REAR SPEAKER ASSEMBLY
a. Disconnect the connector.
b. Remove the 3 screws and the rear speaker assembly.
INSTALLATION
1. INSTALL REAR SPEAKER ASSEMBLY
a. Install the rear speaker assembly with the 3 screws.
NOTE: Tighten the screws in order shown in the illustration to install the rear speaker assembly.
b. Connect the connector.
2. INSTALL QUARTER TRIM FRONT PANEL ASSEMBLY
3. INSTALL BACK DOOR SCUFF PLATE
4. INSTALL BACK DOOR WEATHERSTRIP
5. INSTALL REAR DOOR WEATHERSTRIP
6. INSTALL REAR DOOR SCUFF PLATE