Sienna FWD V6-3.3L (3MZ-FE) (2006)
Headliner: Service and Repair
ROOF HEADLINING
REMOVAL
HINT: On the LH side, use the same procedures as on the RH side.
1. REMOVE FRONT DOOR SCUFF PLATE RH
a. Using a screwdriver, disengage the 3 clips and 2 claws, and remove the scuff plate.
HINT: Tape the screwdriver tip before use.
2. REMOVE FRONT DOOR SCUFF PLATE LH
3. REMOVE REAR DOOR SCUFF PLATE RH
a. Using a screwdriver, disengage the 8 clips and remove the scuff plate.
HINT: Tape the screwdriver tip before use.
4. REMOVE REAR DOOR SCUFF PLATE LH
5. REMOVE COWL SIDE TRIM BOARD RH
a. Using a screwdriver, disengage the 2 clips and claw, and remove the trim board.
HINT: Tape the screwdriver tip before use.
6. REMOVE COWL SIDE TRIM BOARD LH
7. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
8. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH