toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Headliner|Diagrams|Page 7231 > < Headliner|Diagrams|Page 7229
Page 2
background image

9. REMOVE REAR DOOR WEATHERSTRIP RH

HINT:  When reinstalling the weatherstrip, completely remove the sealer adhering to the opening flange on the body side beforehand. 

10. REMOVE REAR DOOR WEATHERSTRIP LH

HINT:  When reinstalling the weatherstrip, completely remove the sealer adhering to the opening flange on the body side beforehand. 

11. REMOVE CENTER PILLAR GARNISH LOWER RH

a. Remove the floor anchor cover.
b. Remove the bolt and disconnect the front seat outer belt on the floor anchor side. 

c. Using a screwdriver, disengage the 5 clips and remove the pillar garnish.

HINT:  Tape the screwdriver tip before use. 

d. w/ power slide door:

Disconnect the power slide door control switch RH connector.

12. REMOVE CENTER PILLAR GARNISH LOWER LH
13. REMOVE CENTER PILLAR GARNISH UPPER RH

a. Using a screwdriver, disengage the assist grip plugs.

HINT:  Tape the screwdriver tip before use. 

b. Remove the 2 torx screws and assist grip No. 2 RH.

Headliner|Diagrams|Page 7231 > < Headliner|Diagrams|Page 7229