Sienna FWD V6-3.3L (3MZ-FE) (2006)
c. Remove the 3 bolts.
d. Using a screwdriver, disengage the clip and remove the pillar garnish.
HINT: Tape the screwdriver tip before use.
14. REMOVE CENTER PILLAR GARNISH UPPER LH
HINT: Use the same procedures described above for the RH side.
15. REMOVE BACK DOOR WEATHERSTRIP
16. REMOVE BACK DOOR SCUFF PLATE
a. Remove the 3 bolts.
b. Using a screwdriver, disengage the 6 clips and remove the scuff plate.
HINT: Tape the screwdriver tip before use.
17. REMOVE QUARTER TRIM PANEL ASSEMBLY FRONT RH
a. Remove the floor anchor cover.
b. Remove the bolt and disconnect the rear No. 2 seat belt on the floor anchor side.