Sienna FWD V6-3.3L (3MZ-FE) (2006)
c. Remove the 2 package holder net hooks.
d. Using a screwdriver, disengage the claw and remove the courtesy light.
e. Disconnect the courtesy light connectors.
f.
Using a screwdriver, disengage the 16 clips and remove the quarter trim panel assembly.
HINT: Tape the screwdriver tip before use.
18. REMOVE QUARTER TRIM PANEL ASSEMBLY FRONT LH
19. REMOVE ROOF HEADLINING GARNISH REAR
a. Using a screwdriver, disengage the 6 clips and remove the headlining garnish.
HINT: Tape the screwdriver tip before use.
20. REMOVE RR WINDOW SIDE GARNISH ASSEMBLY NO.2 RH
a. Using a screwdriver, disengage the 2 claws and remove the cover of the rear No. 2 seat belt on the shoulder anchor side.
HINT: Tape the screwdriver tip before use.
b. Remove the bolt and disconnect the rear No. 2 seat belt assembly on the shoulder anchor side.