Sienna FWD V6-3.3L (3MZ-FE) (2006)
8. REMOVE REAR SEAT NO.1 ASSEMBLY
HINT:
^
Captain Seat Type
^
Center Seat Type
9. REMOVE REAR FLOOR SEAT LOCK COVER
10. REMOVE REAR FLOOR SEAT LOCK COVER
11. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY
a) Remove the 4 nuts and separate the instrument panel junction block assembly w/ wiring harness connector from the body.
b) Disconnect the parking brake switch connector.
c) Remove the bolt, 2 nuts and parking brake control pedal assembly.
DISASSEMBLY
1. REMOVE PARKING BRAKE PEDAL BRACKET PROTECTOR
a) Using a flat-head screwdriver, disengage the 2 claws on the parking brake pedal bracket protector.
b) Turning the parking brake pedal bracket protector clockwise, remove the parking brake pedal bracket protector from the parking brake control
pedal.
2. REMOVE PARKING BRAKE CABLE ASSEMBLY NO.1