Sienna FWD V6-3.3L (3MZ-FE) (2006)
Wheel Speed Sensor: Service and Repair
Front Speed Sensor
REMOVAL
HINT: Remove the RH side by same procedures with LH side.
1. REMOVE FRONT WHEEL
2. REMOVE FRONT ENDED LINER LH
3. REMOVE FRONT SPEED SENSOR LH
a. Disconnect the speed sensor connector.
b. Remove the sensor harness and clamp from the body.
c. Remove the 2 clamp bolts holding the sensor harness and clamp from the body and shock absorber.
d. Remove the bolt and speed sensor front LH.
NOTE: Keep the tip of the speed sensor front LH.
INSTALLATION
HINT: Install the RH side by the same procedures with LH side.
1. INSTALL FRONT SPEED SENSOR LH