Sienna FWD V6-3.3L (3MZ-FE) (2006)
Wheel Speed Sensor: Testing and Inspection
Rear Speed Sensor
INSPECTION
1. INSPECT REAR SPEED SENSOR
a. Disconnect the skid control sensor connector.
b. Measure the resistance between terminals 1 and of the skid control sensor connector.
OK: Resistance:
less than 2.2 kOhms
c. Measure resistance between each of terminals 1 and 2 of the skid control sensor connector and body ground.
OK:
Resistance: 1 MOhms or higher