Sienna FWD V6-3.3L (3MZ-FE) (2006)
c. Disconnect the fuel vapor feed hose.
d. Disconnect the No. 2 fuel vapor feed hose.
e. Disconnect the 2 vacuum hoses.
f.
Remove the clamp.
g. Remove the 2 nuts and the emission control valve set.
13. REMOVE INTAKE AIR SURGE TANK
a. Disconnect throttle motor connector.
b. Disconnect the No. 3 water by-pass hose.
c. Disconnect the No. 2 water by-pass hose.
d. Disconnect the union to check valve hose.
e. Disconnect the ventilation hose.
f.
Remove the 2 set nuts of the pressure feed tube.