Sienna FWD V6-3.3L (3MZ-FE) (2006)
g. Remove the 2 bolts and the No. 1 engine hanger.
h. Remove the 2 bolts and the No. 1 surge tank stay.
i.
Remove the 2 bolts and the No. 2 surge tank stay.
j.
Using a socket hexagon wrench 8, remove the 4 bolts.
k. Remove the 2 nuts, the emission control valve bracket and the intake air surge tank.
l.
Remove the gasket from the intake air surge tank.
14. SEPARATE NO. 1 FUEL PIPE SUB-ASSEMBLY
a. Remove the bolt and the No. 1 fuel pipe.
b. Remove the fuel pressure pulsation damper and the 2 gaskets.
c. Remove the fuel pipe No. 2 union bolt and the 2 gaskets.
15. REMOVE FUEL INJECTOR ASSEMBLY