Sienna FWD V6-3.3L (3MZ-FE) (2006)
C. Remove the air duct assembly.
18. Remove the rear door scuff plate by disengaging the 8 clips with a plastic pry tool.
19. Remove the rear door weatherstrip RH.
HINT
When reinstalling the weatherstrip, completely remove the sealer adhering to the opening flange on the body side beforehand.
20. Remove the back door weatherstrip.
21. Remove the quarter trim front panel assembly RH.
A. Remove the floor anchor cover.
B. Remove the bolt and disconnect the rear No.2 seat belt on the floor anchor side.