Sienna FWD V6-3.3L (3MZ-FE) (2006)
C. Remove the 2 package holder net hooks.
D. Using a plastic pry tool disengage the claw and remove the courtesy light.
E. Disconnect the courtesy light connectors.
F. Using a plastic pry tool disengage the 16 clips and remove the quarter trim panel assembly.
22. Remove the rear speaker assembly by disconnecting the connector and removing the 3 screws.
23. Remove the floor wire harness.
Repair Procedure: Floor Wire Harness Installation
NOTE
Installation is in the reverse order of removal. Only key installation points are noted below.
1. Install the NEW floor wire harness.