Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-1023001.png)
Alternator: Service and Repair
Removal and Installation
REMOVAL
1. REMOVE GENERATOR ASSEMBLY
a. Remove the wire harness clamp.
b. Disconnect the generator connector.
c. Open the terminal cap and remove the nut and the generator wire.
d. Loosen bolts A and B.
e. Loosen bolt C to lessen the tension of the No. 1 V belt.
f.
Remove bolts A, B and the generator.
INSTALLATION
1. INSTALL GENERATOR ASSEMBLY
