Sienna FWD V6-3.3L (3MZ-FE) (2006)
h. Check the camber.
HINT:
-
Adjust the camber to the center of the specified value as much as possible.
-
Adjusting value for the set bolts is 6' to 30' (0.1° to 0.5°).
If the camber is not within the specified value, using the table, estimate how much additional camber adjustment will be required, and select
the camber adjusting bolt.
NOTICE: Tighten the adjusting bolt with a washer and a new nut.
i.
Perform the procedure mentioned above again. At procedure B, replace 1 or 2 selected bolts.
HINT: When replacing the 2 bolts, replace 1 bolt for each time.