Sienna FWD V6-3.3L (3MZ-FE) (2006)
Torque: 9.8 Nm (100 kg-cm, 87 inch lbs.)
e. Install the tube clamp with the nut.
Torque: 9.8 Nm (100 kg-cm, 87 inch lbs.)
3. INSTALL FRONT STABILIZER BRACKET NO.1 LH
a. Install the stabilizer bracket No.1 with the 2 bolts.
Torque: 17 Nm (173 kg-cm, 12 ft. lbs.)
4. INSTALL FRONT STABILIZER BRACKET NO.1 RH
HINT: Perform the same procedure on the other side.
5. INSTALL FRONT STABILIZER LINK ASSEMBLY LH
6. INSTALL FRONT STABILIZER LINK ASSEMBLY RH
HINT: Perform the same procedure on the other side.
7. INSTALL STEERING INTERMEDIATE SHAFT ASSEMBLY
a. Align matchmarks on the intermediate shaft assembly and power steering gear assembly.
b. Install the bolt.
Torque: 36 Nm (367 kg-cm, 27 ft. lbs.)