Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-1144003.png)
c. Install the dust cover.
HINT: Ensure that the springs are installed tightly.
8. INSTALL TIE ROD ASSEMBLY LH
9. INSTALL TIE ROD ASSEMBLY RH
HINT: Perform the same procedure on the other side.
10. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kg-cm, 76 ft. lbs.)
11. INSPECT CENTER FRONT WHEEL
12. INSPECT STEERING WHEEL CENTER POINT
13. ADD POWER STEERING FLUID
14. BLEED POWER STEERING FLUID
15. CHECK POWER STEERING FLUID LEAKAGE
16. INSPECT FRONT WHEEL ALIGNMENT
