Sienna FWD V6-3.3L (3MZ-FE) (2006)
6. INSTALL FRONT COIL SPRING SEAT UPPER LH
a. Install the front coil spring seat upper LH to the shock absorber assembly front LH with the mark facing to the outside of the vehicle.
7. INSTALL FRONT SUSPENSION SUPPORT LH BEARING
a. Install the front suspension support LH bearing.
8. INSTALL FRONT SUSPENSION SUPPORT SUB ASSEMBLY LH
a. Install the front suspension support sub-assembly LH with the mark facing to the outside of the vehicle.
b. Temporarily tighten a new lock nut.
INSTALLATION
1. INSTALL FRONT SHOCK ABSORBER WITH COIL SPRING
a. Install the front shock absorber with coil spring as shown in the illustration.
b. Install the 3 nuts to the upper side of the front shock absorber with coil spring.
Torque: 80 Nm (816 kg-cm, 59 ft. lbs.)