Sienna FWD V6-3.3L (3MZ-FE) (2006)
c. Install the 2 bolts and 2 nuts to the lower side of the front shock absorber with coil spring.
Torque: 210 Nm (2,140 kg-cm, 155 ft. lbs.)
NOTICE: When installing the bolt, hold the nut not to rotate.
d. Fully tighten the lock nut.
Torque: 49 Nm (500 kg-cm, 36 ft. lbs.)
e. Install the front flexible hose No.1 and speed sensor front LH with the bolt.
Torque: 19 Nm (1189 kg-cm, 14 ft. lbs.)
2. INSTALL FRONT STABILIZER LINK ASSEMBLY LH
a. Install the front stabilizer link assembly LH with the nut.
Torque: 74 Nm (755 kg-cm, 55 ft. lbs.)
HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.