Sienna FWD V6-3.3L (3MZ-FE) (2006)
1. INSTALL REAR COIL SPRING INSULATOR UPPER LH
a. Install the insulator upper LH to the coil spring rear LH.
2. INSTALL COIL SPRING REAR LH
a. Apply a shop rug to the rear axle beam assembly.
b. Install the coil spring rear LH to the rear axle beam assembly.
HINT: Fit the lower end of the coil spring into the gap of the spring lower seat.
c. Apply a shop rug to the rear axle beam assembly.