Sienna FWD V6-3.3L (3MZ-FE) (2006)
b. Remove the bolt and separate the shock absorber assembly rear LH.
19. SEPARATE SHOCK ABSORBER ASSEMBLY REAR RH
HINT: Separate the RH side by the same procedures as the LH side.
20. REMOVE COIL SPRING REAR LH
a. Apply a shop rug between the coil spring rear LH and rear axle beam assembly.
b. Apply a shop rug between the coil spring rear RH and rear axle beam assembly.
c. Remove the coil spring LH by slowly lowering the jack.
21. REMOVE REAR COIL SPRING INSULATOR UPPER LH
a. Remove the rear coil spring insulator upper LH from the coil spring rear LH.
INSTALLATION