Sienna FWD V6-3.3L (3MZ-FE) (2006)
6. REMOVE TRANSMISSION WIRE
a. Disconnect the transmission wire connector.
b. Remove the bolt and transmission wire.
c. Remove the O-ring from the transmission wire.
INSTALLATION
1. INSTALL TRANSMISSION WIRE
a. Coat the O-ring of the transmission wire connector with ATF and install it.
b. Install the transmission wire with the bolt.
Torque: 5.4 Nm (55 kg-cm, 48 ft. lbs.)
2. CONNECT TRANSMISSION WIRE
a. Coat the O-ring of the ATF temperature sensor with ATF.
b. Install the ATF temperature sensor with the lock plate and bolt.
Torque: 6.6 Nm (67 kg-cm, 58 ft. lbs.)
c. Connect the 7 shift solenoid valve connectors.