Sienna FWD V6-3.3L (3MZ-FE) (2006)
3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB ASSEMBLY
a. Install the 2 magnets in the oil pan.
b. Apply seal packing to the 18 bolts.
Seal packing: THREE BOND 2430 or equivalent
c. Using a new gasket, install the oil pan to the transaxle case with the 18 bolts.
Torque: 7.8 Nm (80 kg-cm, 69 inch lbs.)
NOTICE: Apply seal packing to the bolts and tighten them within 10 minutes of application.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. ADD AUTOMATIC TRANSAXLE FLUID
6. INSPECT AUTOMATIC TRANSAXLE FLUID
7. INSTALL ENGINE UNDER COVER NO.1
8. RESET MEMORY