Sienna FWD V6-3.3L (3MZ-FE) (2006)
18. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
a. Using SST remove the front bearing from the drive pinion.
SST 09556-22010
19. REMOVE REAR DIFFERENTIAL DRIVE PINION BEARING SPACER
20. REMOVE DIFFERENTIAL CASE ASSEMBLY
a. Align matchmarks on the bearing cap and differential carrier.
b. Remove the 4 bolts and 2 bearing caps.
c. Using SST and a screwdriver, remove the 2 plate washers.
SST 09504-22011
HINT: Measure the thickness of the plate washers and note it down.
d. Remove the differential case assembly and the 2 bearing outer races from the differential carrier.
HINT: Tag the 2 bearing outer races to show the location for reassembly.
21. REMOVE DIFFERENTIAL DRIVE PINION
a. Remove the differential drive pinion.