Sienna FWD V6-3.3L (3MZ-FE) (2006)
4. INSTALL REAR DIFFERENTIAL CASE BEARING RH
a. Using SST and a press, install the case bearing (RH) to the differential case.
SST 09636-20010
5. INSTALL REAR DIFFERENTIAL CASE BEARING LH
a. Using SST and a press, install the case bearing (LH) to the differential case.
SST 09636-20010
6. INSPECT RUNOUT OF DIFFERENTIAL RING GEAR
a. Install the differential case to the carrier, and install the 2 plate washers so that there is no play in the bearing.
b. inch lbs.)
c. Using a dial gage, measure the runout of the ring gear.
Maximum runout: 0.07 mm (0.0028 inch)
d. Remove the 2 bearing caps, 2 plate washers and differential carrier.
7. INSTALL REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
a. Using SST and a press, install the front bearing (outer race) to the carrier.
SST 09950-60010 (09951-00620), 09950-70010 (09951-07150)