Sienna FWD V6-3.3L (3MZ-FE) (2006)
8. INSTALL REAR DRIVE PINION REAR TAPERED ROLLER BEARING
a. Using SST and a press, install the rear bearing (outer race) to the carrier.
SST 09950-60020 (09951-00710), 09950-70010 (09951-07150)
b. Install the removed plate washer to the drive pinion.
c. Using SST and a press, install the bearing to the drive pinion.
SST 09506-30012
9. ADJUST DIFFERENTIAL DRIVE PINION PRELOAD
a. Install the drive pinion and front bearing.
HINT: Assemble the spacer and oil seal after adjusting the gear contact pattern.
b. Install the oil slinger, as shown in the illustration.