toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABS/TCS - Zero Point Calibration Information|Page 3934 > < ABS/TCS - Zero Point Calibration Information|Page 3932
Page 1
background image

Steering Angle Sensor: Testing and Inspection

INSPECTION

INSPECT SPIRAL CABLE SUB-ASSEMBLY

If any of the following conditions occur, replace the spiral cable sub-assembly with a new one.

Condition: Scratches or cracks on the connector Cracks, dents or chipping of the spiral cable sub-assembly.

ABS/TCS - Zero Point Calibration Information|Page 3934 > < ABS/TCS - Zero Point Calibration Information|Page 3932