Supra L6-2997cc 3.0L DOHC MFI (1998)
1. Remove bushing.
Using Special Service Tool (SST) 09223-00010 or equivalent, and a deep socket wrench, remove bushing.
2. Install new bushing.
Using SST 09223-00010 or equivalent, and a deep socket wrench, install a new bushing.
NOTICE: Do not apply grease or oil to the bushing.
INSTALLATION
Installation is in the reverse order of removal. After installation, check the Anti-Lock Brake System (ABS) speed sensor signal and the front wheel
alignment.