Supra L6-2997cc 3.0L DOHC MFI (1998)
(b) Remove the center support bearing.
(1) Using a snap ring expander, remove the snap ring.
(2) Using SST, remove the center support bearing with dust deflector. SST 09950-00020
(c) Install a new center support bearing.
(1) Using SST and a press, install the center support bearing. SST 09330-50010
(2) Using SST and a press, insert a new dust deflector until it almost touches the rubber of the center support bearing. SST 09608-00071,
09608-06041
(3) Using SST and a press, install the dust deflector to the end. SST 09330-50010
(4) Using a snap ring expander, install a new snap ring.
(d) Assemble the intermediate shaft and propeller shaft.