toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Steering Gear|Removal and Installation|Page 6595 > < Steering Gear|Removal and Installation|Page 6593
Page 4
background image

b. Using a (22 mm) spanner to hold the steering rack and using SST 09922-10010 or equivalent, remove the rack end.  

NOTICE:

-

Use SST 09922-10010 in the direction shown in the illustration.

-

Mark the right and left hand rack ends.

6. Remove rack guide spring cap lock nut. 

Using SST 09922-10010 or equivalent, remove the nut.

NOTICE:  Use SST 09922-10010 or equivalent, in the direction shown in the illustration.

7. Remove rack guide spring cap, rack guide spring, rack guide and rack guide seat.

a. Using a (24 mm) hexagon wrench, remove the cap.
b. Remove the seat from the guide.

8. Remove rack housing cap.

9. Remove self-locking nut, bearing and spacer. 

Using SST 09616-00010 or equivalent, to stop the control valve shaft rotating, remove the nut. 

10. Remove dust cover.
11. Remove control valve housing with control valve assembly.

Steering Gear|Removal and Installation|Page 6595 > < Steering Gear|Removal and Installation|Page 6593