Supra Sport Roof L6-2997cc 3.0L DOHC MFI (1998)
a. To prevent oil seal lip damage, wind vinyl tape on the serrated part of the control valve shaft.
b. Using a (6 mm) hexagon wrench, remove the two bolts.
c. Remove the O-ring from the housing.
12. Remove control valve assembly.
Using a plastic hammer, tap out and remove the control valve.
NOTICE: Be careful not to damage the oil seal lip.
13. Remove cylinder end stopper and two spacers.
Using snap ring pliers, remove the snap ring from the rack housing.
14. Remove steering rack and oil seal.
a. Using an extension bar or brass bar and a press, press out the rack with the oil seal.
NOTICE: Take care not to drop the rack.
b. Remove the oil seal from the rack.