T100 Pickup 4WD V6-1805 2959cc 30L SOHC (3VZ-E) (1993) - Intake Manifold Service and Repair
17.
Disconnect the following sensors:
a. Knock Sensor connector
b. No. 2 water temperature switch connector
c. Start injector time switch connector
d. Water temperature switch connector
e. Water temperature sender gauge connector
f.
RH ground strap from No. 3 camshaft bearing cap
g. Injector connectors.
18.
Disconnect the vacuum hose from the BVSV.
No. 2 And 3 Fuel Pipes
19.
Remove the four union bolts, No. 2, No.3 fuel pipes and eight gaskets.
No. 4 Timing Belt Cover Removal
20.
Remove the four bolts and the No. 4 timing belt cover.
No. 2 Idler Pulley And No. 3 Timing Belt Cover
21.
Remove the four bolts and No. 2 idler pulley.