toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fuel Injector|Removal|Page 2593 > < Fuel Injector|Removal|Page 2591
Page 4
background image

^

Connect the Cold Start Injector Tube with a new gasket and the union bolt.

Torque:  15 Nm (13 ft lb). 

^

Connect the Cold Start Injector connector.

^

Install the No. 5 water bypass hose to the water bypass pipe.

^

Connect the No. 4 water bypass hose to the union of the intake manifold.

^

Connect the Positive Crankcase Ventilation (PCV) Hose to the union.

^

Connect the Canister vacuum hose to the Throttle Body.

^

Connect the Throttle Position Sensor connector.

Fuel Injector|Removal|Page 2593 > < Fuel Injector|Removal|Page 2591