T100 Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1993)
/Page-805005.png)
5. Connect fuel return hose.
6. Connect vacuum sensing hose.
7. Connect air cleaner hose.
8. Connect the following cables:
^
A/T: Throttle cable
^
Accelerator cable
^
W/Cruise control: Actuator cable with bracket
9. Refill with engine coolant.
10. Connect negative terminal cable to battery.
11. Check for fuel leakage.
^
With the ignition switch ON, use SST to connect terminals FP and +B of the Data Link Connector (DLC) 1. (SST 09843-18020)
^
Check for fuel leakage.
^
Remove jumper from the DLC1.