T100 Regular Cab Pickup 2WD L4-2693cc 2.7L DOHC MFI (1998)
7. A340E: REMOVE OIL PIPE
Pry up both pipe ends with a large screwdriver and remove the 2 pipes.
8. A340F: REMOVE OIL PIPE
Pry up both pipe ends with a large screwdriver and remove the pipe.
9. REMOVE VALVE BODY
a. Remove the 17 (or 16) bolts.
Bolt length:
Bolt A: 23 mm (0.91 inch)
Bolt B: 32 mm (1.26 inch)
b. Disconnect the throttle cable from the cam.
c. Remove the valve body.
NOTICE: Be careful not to drop the check ball body and spring.
10. INSTALL VALVE BODY
a. Align the groove of the manual valve with the pin of the lever.
b. Connect the throttle cable cam.
c. Check the springs into the accumulator pistons are installed correctly.