Tacoma 2WD V6-4.0L (1GR-FE) (2006)
from the vehicle's in-service date.
^
Warranty application is limited to occurrence of the specified condition described in this bulletin.
Repair Procedure
1. Disconnect the cable from the negative (-) battery terminal.
2. Remove the glove compartment door assembly.
A. Disengage the claw and separate the glove compartment door stopper from the glove compartment door assembly.
B. Slightly deform the upper part of the glove compartment door assembly to release the 2 stoppers and open the glove compartment door assembly
until it becomes horizontal.
C. Pull the glove compartment door assembly toward the rear of the vehicle to release the 3 hinges and remove the glove compartment door
assembly.
D. Remove the glove compartment door stopper.