Tacoma 2WD V6-4.0L (1GR-FE) (2006)
/Page-1164004.png)
b. Using SST, separate the tie rod end from the steering knuckle arm.
SST 09610-20012
9. SEPARATE FRONT SUSPENSION LOWER ARM
a. Remove the 2 bolts, and separate the front lower ball joint attachment from the front axle.
10. SEPARATE FRONT SUSPENSION UPPER ARM
a. Remove the clip and nut.
b. Using SST, separate the upper ball joint from the steering knuckle.
SST 09628-62011
11. REMOVE FRONT AXLE HUB
DISASSEMBLY
1. REMOVE KNUCKLE GREASE RETAINER CAP
a. Using a screwdriver and a hammer, tap out the knuckle grease retainer cap.
