Tacoma 2WD V6-4.0L (1GR-FE) (2006)
10. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
a. Using SST, remove the front bearing.
SST 09556-22010
b. Using SST, remove the front bearing outer race.
SST 09308-00010
c. Using a screwdriver, bend the oil storage ring and remove it.
11. REMOVE REAR DIFFERENTIAL DRIVE PINION BEARING SPACER/
INSTALLATION
1. INSTALL REAR DIFFERENTIAL DRIVE PINION BEARING SPACER
a. Install a new rear differential drive pinion bearing spacer.
2. INSTALL REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
a. Using a brass bar and a hammer, install a new oil storage ring.
b. Using SST and a hammer, install the front bearing outer race.
c. Install the front bearing.
SST 09316-60011 (09316-00011, 09316-00021)
3. INSTALL REAR DIFFERENTIAL DRIVE PINION OIL SLINGER (w/ Differential Lock)
4. INSTALL REAR DIFFERENTIAL CARRIER OIL SEAL
a. Using SST and a hammer, install a new oil seal.
SST 09554-30011
Oil seal drive in depth: 0.5 to 0.5 mm (-0.0197 to 0.0197 inch)
b. Coat oil seal lip with MP grease.
5. INSTALL REAR DRIVE COMPANION FLANGE SUB-ASSEMBLY REAR
a. Using SST, install the companion flange.
b. Coat the threads of a new nut with hypoid gear oil LSD.
SST 09950-30012 (09951-03010, 09953-03010, 09954-03010, 09955-03030, 09956-03030)