Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
2.
Using a 13 mm wrench, nest and locate an 8 mm flange nut into position. Hold the nut in place with the wrench, while tightening up the 8 mm bolt,
as shown at right.
Torque: 18 ft.lbs
3.
Repeat this process for the second bolt on the mounting bracket.
Torque: 18 ft.lbs
4.
Repeat the process for the rear bracket on the opposite side of the vehicle.