Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
Headliner: Service and Repair
Roof Headlining (Extra Cab)
REMOVAL
HINT: Tape the screwdriver tip before using to pry parts.
1. REMOVE BACK PANEL UPPER GARNISH AND REAR SEAT BACK
a. Using a screwdriver, remove the garnish.
b. Remove the 3 bolts and rear seat back.
Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
2. REMOVE BACK PANEL LOWER GARNISH
Using a screwdriver, remove the garnish.
3. REMOVE REAR SEAT CUSHIONS
Remove the 4 bolts and rear seat cushions.
Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
4. REMOVE QUARTER TRIMS
a. Remove the 4 screws and scuff plate.
b. Remove the door opening trim around the quarter trim.
c. Remove the 2 cover and 2 bolts, disconnect the front seat outer belt.
d. Using a screwdriver, open the seat belt anchor cover.
e. Remove the 2 bolts and disconnect the rear seat outer belt.
f.
Remove the screw and coat hook.