Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
/Page-1213002.png)
g. Using a screwdriver, pry and remove the quarter trim.
5. REMOVE FRONT PILLAR GARNISHES
a. RH:
Remove the 2 plugs, 2 bolts and assist grip.
b. Remove the door opening trim around the front pillar.
c. Using a screwdriver, remove the front pillar garnishes.
6. REMOVE ROOM LIGHT
a. Using a screwdriver, remove the room light cover.
b. Remove the 2 screws and room light, then disconnect the connector.
7. REMOVE INNER REAR VIEW MIRROR
