toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Brake Pad|Specifications|Page 2829 > < Brake Pad|Specifications
Page 1
background image

Brake Pad: Service and Repair

REPLACEMENT 

HINT:  Pre runner is the described.
RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB, VZN195L-CRPDKAB, VZN19SL-PRPDKAB

1. REMOVE FROM WHEEL

2. INSPECT PAD LINING THICKNESS

Check the pad thickness and replace pads if not within specification.
Minimum thickness: 1.0 mm (0.039 inch) 

3. REMOVE CLIP, 2 PINS AND ANTI-RATTLE SPRING 
4. REMOVE 2 PADS AND 4 ANTI-SQUEAL SHIMS

NOTICE:  The anti-rattle spring and clip can be used again provided that they have sufficient rebound, no deformation, cracks or wear, and have

Brake Pad|Specifications|Page 2829 > < Brake Pad|Specifications