Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
22. REMOVE LH CAMSHAFT TIMING PULLEY
a. Using SST, loosen the pulley bolt.
SST 0996-10010 (09962-01000, 09963-01000)
b. Remove the bolt, knock pin and timing pulley.
23. REMOVE NO.2 IDLER PULLEY
Remove the bolt and idler pulley.
24. REMOVE NO.1 IDLER PULLEY
Using a 10 mm hexagon wrench, remove the pivot bolt, idler pulley and plate washer.
25. REMOVE CRANKSHAFT TIMING PULLEY
Remove the timing pulley.
HINT: If the pulley cannot be removed by hand, use SST and a service bolt to remove the timing pulley.
SST 09950-50011 (09951-05010, 09952-05010, 09953-05020, 09954-05010)
INSPECTION
1. INSPECT TIMING BELT
NOTICE:
-
Do not bend, twist or turn the timing belt inside out.
-
Do not allow the timing belt to come into contact with oil, water or steam.
-
Do not utilize timing belt tension when installing or removing the mount bolt of the camshaft timing pulley.