Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
3. CONNECT PRESSURE FEED TUBE
a. Install the union bolt with a new gasket on each side of the tube.
Torque: 47 Nm (475 kgf-cm, 34 ft. lbs.)
HINT: Make sure the stopper of the tube is touching the PS pump body as shown, then torque the union bolt.
b. Install the oil pressure switch to the pressure feed tube.
Torque: 21 Nm (210 kgf-cm, 15 ft. lbs.)
c. Connect the connector to the oil pressure switch.
4. CONNECT RETURN HOSE
5. INSTALL AIR CLEANER ASSEMBLY
Install the air cleaner assembly with the 3 bolts.
6. BLEED POWER STEERING SYSTEM