Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
/Page-986002.png)
HINT: Pre runner is the model described.
RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB
1. 4WD: REMOVE OIL SEAL (INSIDE)
a. Clamp the axle hub in a soft jaw vise.
HINT: Close vise until it holds hub bolts. Do not tighten further.
b. Using a screwdriver, remove the oil seal (inside).
2. Pre runner: REMOVE GREASE CAP
a. Clamp the axle hub in a soft jaw vise.
HINT: Close vise until it holds hub bolts. Do not tighten further.
b. Using a screwdriver, remove the grease cap.
