Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
b. Using SST and a press, install a new bearing.
SST 09515-30010, 09950-60020 (09951-00890)
7. INSTALL NEW OUTER OIL SEAL
Using SST and a hammer, install a new oil seal.
SST 09950-60010 (09951-00610), 09950-70010 (09951-07150)
8. REPLACE BEARING CASE
a. Remove the oil seal (outer side) and bearing.
b. Install 4 nuts to the serration bolts.
c. Using a hammer, remove the serration bolts and bearing case.
d. Position the backing plate on a new bearing case and using 2 socket wrenches, install the serration bolts.
e. Install a new bearing and oil seal (outer side).
9. REPLACE OIL DEFLECTOR
a. Using a brass bar and hammer, remove the hub bolts, oil deflector and gasket.
b. Position a new gasket on the axle shaft and install a washer and nut to a new hub bolt, as shown in the illustration, and install the hub bolt by
torquing the nut.