Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
NOTICE: Be careful not to damage the edge of arm tubes.
1. Using SST and a press, press down the suspension arm tube until it touches SST.
SST 09710-30021 (09710-03031, 09710-03141)
NOTICE: Do not press the tube excessively.
2. Temporarily install a bolt to the arm shaft on the other side.
Bolt length: 45-50 mm (1.8-2.0 inch)
3. Using SST and a press, remove the bushing and arm shaft.
SST 09710-30021 (09710-03141)
4. Using SST and a press, remove the other bushing.
SST 09710-30021 (09710-03071, 09710-03141)
c. Install new bushings.
1. Using SST and a press, install a new bushing.
SST 09710-30021 (09710-03101)
2. Place the arm shaft on the bushing.
3. Using SST and a press, install another new bushing.
SST 09710-30021 (09710-03101)