Tundra 2WD V6-4.0L (1GR-FE) (2005)
5. REMOVE THE MUFFLER
(a) Locate the V-band clamp found in front of the muffler.
(b) Remove the V-band clamp bolt and nut.
(c) Remove the V-band clamp.
(d) Remove and discard the V-band clamp exhaust pipe gasket.
(e) Remove the 2 muffler support brackets from the rubber exhaust hangers, and then remove the muffler.
NOTE:
Lubricating the rubber exhaust hangers with soap & water can facilitate muffler support bracket removal.
C. RIGHT REAR BRAKE HOSE INSPECTION