Tundra 2WD V6-4.0L (1GR-FE) (2005)
1. w/ LOAD SENSING VALVE DISCONNECT SHACKLE NO.2 FROM BRACKET
a. Remove the nut and cushion retainer, and disconnect shackle No.2.
b. Remove the 2 bushings and collar.
c. Remove the 2 bolts and shackle bracket.
2. REMOVE LSP & BV ASSEMBLY
a. Using SST, disconnect the 3 brake lines from the valve body.
SST 09751-36011
b. Remove the 2 valve bracket mounting bolts and the LSP & BV assembly.
3. w/ BLEND PROPORTIONING VALVE REMOVE BLEND PROPORTIONING VALVE ASSEMBLY
a. Disconnect the 4 brake lines.
b. Remove the 3 bolts and blend valve.
Torque: 29 Nm (296 kgf-cm, 21 ft. lbs.)
INSTALLATION
1. INSTALL LSP & BV ASSEMBLY TO FRAME
Install the LSP & BV assembly and 2 valve bracket mounting bolts.
Torque: 29 Nm (300 kgf-cm, 22 ft. lbs.)
2. CONNECT BRAKE LINE
Using SST, connect the 3 brake lines.
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
SST 09751-36011