Tundra 2WD V6-4.0L (1GR-FE) (2005)
Compressor Clutch: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE MAGNET CLUTCH
a. Place the compressor and magnetic clutch in a vise.
b. Using SST, remove the bolt, the magnet clutch hub and the magnet clutch washer.
SST 09960-10010 (09962-01000, 09963-00500)
c. Using a snap ring expander, remove the snap ring and the magnet clutch rotor.
d. Remove the screw and disconnect the connector.
e. Using a snap ring expander, remove the snap ring and the magnet clutch stator.
REASSEMBLY